Polar RGBCCT

SKU: SE040019NDR0

The Polar RGB CCT strip provides the ultimate colour changing solution. Allowing colours to be mixed and matched to create endless combinations, to suit any style, mood or atmosphere.

  • A combination of RGB and CCT
  • Can be dimmed to achieve further customisation
  • High number of LED's per meter (840) offering a diffused look
  • Chip on board (COB) technology
  • 24V allows long runs of light without any light fade
  • High colour rendering index >90
  • VHB (Very High Bond) adhesive tape backing for secure installation
  • Pre-soldered driver connection cables at both ends
  • Compatible with Sensio RGB CCT Receiver and Universal Remote Control or the Titan RGBCCT Smart Driver to control, zone and dim the lights
Light Colour: RGBCCT
Size: 3m Reel
Voltage
24V
Wattage
5 W/m
No. of LEDs
840 LEDs/m
Lumens
450 lm/m
Kelvins
2700K-65000K
Light Technology
RGB CCT
Beam Angle
180°
Cut Marks
Every 36mm
Cable Length
2500mm
Dimensions
3000mm x 12mm x 3mm | 5000mm x 12mm x 3mm | 10000mm x 12mm x 3mm
Dimmable
Yes, with RGB CCT receiver or smart driver
IP Rating
IP20
Warranty
5 Years
Material
COB Strip Light+Wire

Ultimate colour changing solution

Allowing a wide range of colours and whites to be mixed and matched to create endless combinations,​ to suit any style, mood or atmosphere​.

Adding ambience

With a high number of LEDs per meter, this flexible strip significantly reduces the appearance of individual LEDs giving off a soft glow of light.

Versatile application

Highly effective along kitchen plinths, shelving and for highlighting bedroom alcoves and recesses.

Get the job done

Suggested Installation

Here is a package we'd recommend for setting up the Polar RGBCCT LED strip.
You can work out what driver you need for your job on our calculator.

#light colour_cool white #size_5000mm kit

Titan+ Driver

Choose the correct single colour (2-pin) driver you require for installation. Workout what wattage size you need on the calculator at the bottom of the page.

RGB CCT Receiver

Connect the 2-pin cable to the driver and hook up your Polar RGBCCT strip to the 6-pin connection. Pair the universal remote to customise the light control.

Universal Remote

Once you've paired your remote to the receiver you can customise the control of your lighting by dimming, changing colour and zoning lighting.

RGBCCT compatible accessories